DiamaPro® Diama-Grout 2.0 is a rapid setting, easy to use, blended polyurethane and polyurea resinous concrete repair material. Its optimized formula enables it to be used in the repair of a multitude of concrete defects. Spalled concrete, cracked concrete, small surface defects and pin holes can be filled prior to the polishing or floor coating process with DiamaPro® Diama-Grout 2.0.
DiamaPro® Diama-Grout 2.0 has an easy to mix 1:1 mixing ratio. Small batches are obtainable. The 100% solids formula lends itself well when filling deeper repairs such as spalling of control joint shoulders without outgassing. The extended pot life and working time are ideal when pre-filling concrete surface pin holes prior to the polishing or coating process.
Features & Recommended Uses
- Features
- Fast set: rapid final cure time
- No outgassing in deep repairs
- <60-minute grinding time
- Surface and Air Temperature Range: 35°F to 95°F
- Color tint packs are available.
- Mixes with oven-dried aggregate for deeper repairs
- Recommended Uses
- Fill pin holes, cracks and small defects during the polishing or coating process.
- Shallow spall repair
- When a quick turn-around floor repair is desired
- When oven-dried aggregate is added, deep repairs can be obtained.
